Connect Here
Zone Technologies Self-Running Arrow Board Controller
Product Code: CTRL-FL1
DESCRIPTION
- The self-running CTRL-FL1TM arrow controller, assembled in an ultra rugged and compact housing, can control all types of arrow boards and accessories.
- Ideal for controlling arrow board or accessories such as arrow boards, motorized supports, work lamps, beacons, etc.
FEATURES
- Protection against short circuits on all outputs
- Day / night operating mode with integrated photocell
- One 5A output for beacon or accessory control
- Programmable operating parameters (Intensity, flashing speed, up and down motor runtime, etc.)
- Integrated no clutch actuator control
- Wireless Ignition detection
- Protection against overvoltage and reverse polarity
- Lighted membrane
- Low battery detection (programmable)
- No external components required
- VSS mod (CAN BUS, differential VSS, 1 wire VSS, preprogrammed speeds)
- Higher actuator rise and descent time
Operating Voltage: 8 to 16Vdc
Operating Temperature: -40°C to 75°C (-40°F to 167°F)
Current draw (continius mode): (With a 14Vdc power source); Standby mode, without ignition : 0.8mA; Activated, no load: 20mA
Auxiliary output: Activated = + 12V .................................. 5A
Arrow board power output: Activated = + 12V .................................. 15A
MOT+ and MOT- outputs: Activated = + 12V and GND .................. 20A
Operating Temperature: -40°C to 75°C (-40°F to 167°F)
Current draw (continius mode): (With a 14Vdc power source); Standby mode, without ignition : 0.8mA; Activated, no load: 20mA
Auxiliary output: Activated = + 12V .................................. 5A
Arrow board power output: Activated = + 12V .................................. 15A
MOT+ and MOT- outputs: Activated = + 12V and GND .................. 20A
Arrow board channels (each): Activated = GND ..................................... 5A